Phone Case DIY Clone
A Beginner's Guide to Making Your Own Phone Case
The majority of people nowadays own a cell phone, and protecting it with a phone cover is a great way to do so. Finding one that fits your phone and style might be tricky, though, because cell phones come in a range of shapes and sizes. You won't need to worry because this article will show you how to make your own phone case. It's much easier than you might think!
You may make your own phone case in a variety of ways from scratch. This can be done with hot glue, silicone, and cornstarch.This article will walk you through the step by step:
How to Make Your Own Phone Case using Hot Glue
Using hot glue is a quick and easy way to construct your own personalised phone case. If you're seeking to make a smooth phone case, this isn't the product for you; instead, take a look at this one. Read More Customer Reviews. However, if you want to be creative without spending a lot of money, take these steps:
Step 1: Obtain all of the needed items.
The following elements are required:
- Hot glue gun with glue sticks
- (Wax paper is not recommended since the adhesive will stick to it.) Paper made with parchment
- a strip of tape (any kind would do)
- Permanent marking pen
- Pencil or coloured pencil
Step 2: Picking a Style
You'll need to print a template pattern and glue it to the back of the phone if you wish to use one. Swirls and mandalas are the most popular patterns. If you wish to make your own design, you can draw it freehand or trace it. If you decide to do so, you must follow the instructions below:
- Take a piece of paper and trace your phone on it.
- Make a pattern with the permanent marker. Don't forget to include the sides.
- Cut the pattern out, being sure to stick to the outline.
- Tape your phone's final output to the rear.
Step 3: Use Parchment Paper to Wrap Your Phone
To do this, cut a piece of parchment paper twice the size of your phone. Placing your phone on top of the paper with the screen facing you is a nice idea. Wrap the paper over the edges of your phone to protect it. Make sure it's taped securely and that it's tight. The tape should be applied to the front of the phone. Wrap plastic wrap around the top and bottom edges and secure with tape.
Step 4: Label the Speakers and Ports
Using a pen or coloured pen, mark off ports, cameras, buttons, and anything else important. These marks will be used as a reference to make sure hot glue does not cover them. Make sure you can see the colour of the pen you're using.
Step 5: Begin glueing your case together.
You must first fill in the edges. Fill it up to the brim, since this will help to bolster your case. All of the buttons should be avoided. Fill in the blanks in the back. You can either stick to the pattern or go with the flow. Make sure that all of the lines are connected to the phone's sides and to each other.
Step 6: Remove the Parchment Paper and the Case.
Once the glue has healed, you can remove it from your phone. After that, remove the parchment paper from the phone. On your phone, you may now put the case to the test. Look for any glue on the button, ports, camera, and other locations. If there is, cut it away with a craft blade.
Step 7: Apply the Paint on the Case
It can be colored with whichever colour you like. Whether it's nail polish or acrylic paint, you can use whatever you have on hand. Allow for drying time.
That's how you make your own low-cost, straightforward phone case!
Puffy Paint DIY Phone Cases Instructions
DIY Phone Case with Butterflies
Begin with a transparent phone case.
- Make a butterfly outline on the phone case with white dimensional fabric puffy paint.
- Begin painting a line of colour from the top to the bottom of each wing with red puffy paint on the far side. In a rainbow arrangement, add more colours. You can adjust the thickness of the lines as you add more colours, depending on how much space you have left.
- Create a petal design within each wing using a toothpick by dragging it across the wing. After each use, wipe the toothpick clean.
- On each wing, repeat the first two steps.
- Add butterfly antennae and body dots using gold metallic dimensional paint.
What is the best way to make a Geometry phone case?
You'll need the following items:
- a phone cover made of plastic
- an absorbent sponge (for mixing paints)
- acrylic paint in white and black (to create a gradient)
- a measuring device (for making perfect lines)
- a bunch of different coloured markers
There are various benefits and highlights of making custom painted phone cases at home:
- Painting your phone case is a cheap and enjoyable way to personalise your device. It's a lot less expensive than buying a pre-made phone case.
- Painting is a creative and enjoyable experience! With your own hands, you're creating an entirely new and distinctive accessory.
- Artistro markers have an acrylic and oil foundation that is permanent, therefore the drawing will last a lifetime! (If necessary, a coat of varnish can be applied to the drawing to protect it against damage such as pocket friction.)
- It is not required to purchase a large number of art supplies (such as several types of paints, brushes, fixers, or paint remover) to complete any artwork; one pair of markers will suffice.
- If you get bored with your existing drawing, you can quickly replace it by buying a new blank phone case and creating a new work of art.
